Anti-interference agent: eliminates pinholes and shrinkage holes in the coating during the curing process. Adding more than 0.5% can eliminate the need for brightener agent 701.

0.5-1% (pre-blending)

Anti-interference agent: enhance the compatibility between powder raw materials and solve the pinholes and shrinkage holes caused by mutual interference

0.5-1% (pre-blending)

Surface rheology agent: adjust the surface tension of the coating, improve leveling and gloss, and enhance the clarity and smoothness of the coating surface

0.5-1% (pre-blending)

Smoke suppressant: reduces the volatilization of small molecules during the extrusion process, reduces odor and smoke, and has excellent smoke suppression effect

0.5-1% (pre-blending)

Surface hardening material: improves coating hardness and wear resistance, does not impress screen printing and recoating, and does not require the addition of wax powder after use

0.5-1% (pre-blending)

Anti-coating breakage agent: adjust surface tension to solve the problem of coating edge leakage and corner leakage

0.5-1% (pre-blending)

Surface tension adjuster: effectively adjust the surface tension of the coating, improve the adhesion and adhesive properties between powder layers

1-2% (pre-blending)

Wear-resistant and pressure-resistant materials: effectively improve the impact resistance of super weather-resistant systems, including wear resistance and anti-fouling capabilities

1-2% (pre-blending)

Ether dye: Improve the impact and bending properties of super weathering systems, polyurethane systems and acrylic systems

1-2% (pre-blending)

Fluorocarbon resin: high fluorine content, excellent weather resistance, weather resistance up to 15/20 years, good chemical and heat resistance

3-10% (pre-blending)

Special-effect flexibilizer: significantly improves the impact and tensile properties of the coating, and effectively improves the flexibility and bendability of the coating

0.5-1.5% (pre-blending)

Wrinkle texture three-dimensional effect enhancer: effectively solve the problem of unstable texture of orange grain powder coating and improve the three-dimensional effect

0.2-0.6% (pre-blending)

Anti-fingerprint agent: effectively reduces sweat and fingerprint problems on powder coating

0.5-1% (pre-blending)

Corner coating agent: effectively solve the sagging phenomenon of powder during film forming process and enhance the corner coating

0.5-1% (pre-blending)

Transfer aids: used in thermal transfer formulations to facilitate paper tearing, improve transfer clarity, and eliminate fogging

0.3-0.6% (pre-blending)

Anti-caking and flow-aiding agent for powder coatings: solves the problem of powder agglomeration and clumping at high temperatures, improves powder fluidity, and does not affect gloss and leveling

0.2-0.5% (dry-blending)

Anti-caking loosening agent for powder coating: improves powder looseness, makes powdering easier, and does not affect gloss and leveling

0.2-0.5% (dry-blending)

High-performance loosening agent: improves powder looseness, has excellent high-temperature anti-caking performance, is easy to apply powder, and improves powder accumulation at the spray gun nozzle during metal powder spraying

0.2-0.5% (dry-blending)

Nano-alumina: Improves powder agglomeration, increases fluidity and powder loading rate

0.1-0.3% (dry-blending)

Nano-silicon dioxide: Improves powder agglomeration at high temperatures, increases fluidity and powder loading rate

0.1-0.3% (dry-blending)

Hydrophobic nano-silica: Improves powder agglomeration at high temperatures, increases fluidity and powder loading rate

0.1-0.3% (dry-blending)

Antimicrobial agent: effectively inhibits the growth of bacteria and mold, protecting the coating from mold corrosion

0.2-0.5% (pre-blending)

Skin-feel cleaning material: provides special matte effect, fluff and skin-feel effect on the coating, and improves the surface hardness and wear resistance of the coating

14% (pre-blending)